Visit Open-E website
Results 1 to 10 of 22

Thread: System not booting

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    This could be a Memory issue, try resetting the RAM or swapping out with new ones. This could be the DOM or a Memory issue (try using a memory check).
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  2. #2

    Default

    We checked the memory several times and all was OK.
    But we are stubborn and decided to redo the flashing and restart again.
    This time the SO loaded!!
    So at least we are on-line again...

    BUT we have "No share volume !!! (lv00)" on our Resource tab and no Function button.

    We see the unit, but no volume group in the system, as we feared...
    If we try to add it to the NAS its content will be erased, isn't it?
    So... there is no exit? Our data are gone for good??

    Waiting for any info,
    UniToV

  3. #3

    Default

    To gain access to your shares - go to the Resources tab and in Function create new share - uncheck the box "Create default path" there you can see your shares again, then create them.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  4. #4

    Default



    We have no Function in the Resource Tab!!
    Did we miss something?

    UniToV.

  5. #5

    Default

    Moreover, in the welcome screen on the NAS, the one which is as follows

    Welcome to Open-E NAS
    -------------------------------

    Model: Open-E NAS ENTERPRISE
    Version: 1.89.E000000000.2024
    Release date: 2006-07-05
    S/N: xxxxxxxxxxx

    Network interface:
    ...

    and so on, we read a terrifying phrase on the bottom of the screen:

    WARNING: One system file checksum doesn't match the pattern.

    Do we have to seriously worry?

  6. #6

    Default

    Is it possible to send the logs to support@open-e.com and can you enable remote support in the console tools stating issue. If this is not possible please contact Open-E's main number that I supplied in previous emails.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  7. #7

    Default

    Quote Originally Posted by To-M
    can you enable remote support in the console tools stating issue.
    Do you mean checking this box? (Click on the thumbnail to enlarge the image)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •