Alle LUN nicht angezeigt im vSphere Client (ESXi)

[reuser]

Network is fine.

Situation:

Open-E (replication,failover working) with two volumes, vol00=100GB and vol01=50GB (all for testing)

Szenario A
failover-target1 - vol00 + iSCSI ID + LUN 0 (100GB)
failover-target2 - vol01 + iSCSI ID + LUN 1 (50GB)

esxi only show a LUN 0 with 50GB
(open-e has the vol01+LUN 1 the 50GB)

Szenario B
failover-target1 - vol00 + iSCSI ID + LUN 0 (100GB) & - vol01 + iSCSI ID + LUN 1 (50GB)

esxi only show a LUN 0 with 100GB

I have tested the failover-target1 with vol00+LUN1 and vol01+LUN2, esxi shows here only a LUN1 (vol00,100GB)

[reuser]

Now i have the failover deactivated on one open-e server (no1) and only the volumes on the iscsi target configured.

Open-e Server:
bond0 with IP 192.168.2.220
failover-target1 + vol00(LUN0) + vol01(LUN1) + vol02(LUN2)

on exsi (with vmkernel network 192.168.2.200) i see all LUNs (0,1,2)

Only in failover with virtual IP are the LUNs not working/not to see.