We are looking at them now, there is some drop packets on eth1 and there is a MTU/Jumbo frame miss match value MTU:1500 / 9000 for your bond 1. You also need to update both of your DSS systems to the latest version, you have very old version.

Now from the logs it shows the lv0003 not online but only active ( lv+b+lv0003 vg+vg00 -wi-a- 1000.00G). So "-wi-a" should look like "-wi-ao" the "a" means active and the "o" means online. Try to stop and restart the LUN from the Target.


Version: 6.0up55.8101.5087

eth1: too many iterations (6) in nv_nic_irq.
eth1: too many iterations (6) in nv_nic_irq.

bond1 Link encap:Ethernet HWaddr 02:54:48:5C:5F:7F
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:9000 Metric:1
RX packets:29394787420 errors:811 dropped:0 overruns:0 frame:811
TX packets:38990567435 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:67970103894290 (61.8 TiB) TX bytes:258399518745771 (235.0 TiB)

eth0 Link encap:Ethernet HWaddr 02:54:48:5C:5F:7F
UP BROADCAST SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:251

eth1 Link encap:Ethernet HWaddr 02:54:48:5C:5F:7F
UP BROADCAST RUNNING SLAVE MULTICAST MTU:9000 Metric:1
RX packets:29394787420 errors:811 dropped:0 overruns:0 frame:811
TX packets:38990567435 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:67970103894290 (61.8 TiB) TX bytes:258399518745771 (235.0 TiB)
Interrupt:250 Base address:0x8000