Replication DiskLess

[nsc]

Hi To-M,

For MTU, i can't change it. When Bond is up, with the console management i can only change the MTU for Bond not the MTU for each attached NIC :

http://img810.imageshack.us/img810/2701/bondmtu.png

For my LUN, everything look OK :

http://img51.imageshack.us/img51/3735/lunx.png

So i just stop / start the replication task :

http://imageshack.us/photo/my-images...plication.png/

For Update, i knew that i have an older version but after 6 months without any errors or problems, i'm not a big FAN of updating something working ;-)

We'll see affter the end of replication.

[To-M]

For MTU, i can't change it. When Bond is up, with the console management i can only change the MTU for Bond not the MTU for each attached NIC :

So you created the Bond without setting both of the NICs to Jumbo frame value - then you will have to schedule some down time then to break the bond and set the other NIC to the proper Jumbo frame and re-create the bond.

[nsc]

Thanks for the info about MTU on Bond.

[nsc]

After the restart of replication task, the lv0003 goes down and nothing working anymore.
I have to hard reset my two ESX Host after a proper restart for OpenE.

But the data stored n VMDK from LV003 are corrupted

I think the hard reset was too hard...

[Al-S]

Did you checked your RAID Controller health, also your RAID Array (storage disks) health?

[marajenda]

hey guys i am here and i want to know much more about DSS.

(Advertising link deleted by Open-E team).

[Al-S]

You can get the manual from our website at:
http://www.open-e.com/service-and-su...loads/manuals/

Or contact us as mentioned in the "contact us" menu in our website.