Open-E DSS and OpenVMS cooperation

[piotrp]

Hello!
Our client wants to attach a DSS driven storage to OpenVMS. I have created luns for it. But i can`t attach it. When he scans in OpenVMS for it he gets errors like this:

When lun0 has size of ~1GB

Probing Target 25 ================================================== ========

Port WWID: 2100-001B-3291-81B1
Node WWID: 2000-001B-3291-81B1

Target = 25. LUN = 0.
----------------------
Standard Inquiry failed, status = 209c
Unable to get target data at target 25 LUN 0, status = 209c (SS$_INVLOGIN)

Probing Target 26 ================================================== ========

Target = 26. LUN = 0.
----------------------
Standard Inquiry failed, status = a58 (SS$_NOMOREDEV)
End of scan for port PGB.

or like this

Target = 25. LUN = 0.
----------------------
Devname: Not Configured
Vendor ID: SCST_FIO
Product ID: NkV1PGdfQfD8pImV
Devtype: 0 (Disk)
Rev Level: 200
Pg00 supported, Pg83 supported, Pg80 supported.
Standard UDID status = 2c
Vendor-specific UDID status = f4
Unable to get target data at target 25 LUN 0, status = f4

Probing Target 26 ================================================== ========

Target = 26. LUN = 0.
----------------------
Standard Inquiry failed, status = a58 (SS$_NOMOREDEV)
End of scan for port PGB.

Is OPEN-E compatible with OpenVMS ? Will it be ?

[piotrp]

Cant edit my post.
I did FC masked and default group try. Everything was done by FC. I made 2 luns and tried to attach it to OpenVMS.

[Gr-R]

See here:
http://h20000.www2.hp.com/bizsupport...ctID=c01859146

hope it helps.