Hello!
Our client wants to attach a DSS driven storage to OpenVMS. I have created luns for it. But i can`t attach it. When he scans in OpenVMS for it he gets errors like this:

When lun0 has size of ~1GB

Probing Target 25 ================================================== ========

Port WWID: 2100-001B-3291-81B1
Node WWID: 2000-001B-3291-81B1

Target = 25. LUN = 0.
----------------------
Standard Inquiry failed, status = 209c
Unable to get target data at target 25 LUN 0, status = 209c (SS$_INVLOGIN)

Probing Target 26 ================================================== ========

Target = 26. LUN = 0.
----------------------
Standard Inquiry failed, status = a58 (SS$_NOMOREDEV)
End of scan for port PGB.
or like this
Target = 25. LUN = 0.
----------------------
Devname: Not Configured
Vendor ID: SCST_FIO
Product ID: NkV1PGdfQfD8pImV
Devtype: 0 (Disk)
Rev Level: 200
Pg00 supported, Pg83 supported, Pg80 supported.
Standard UDID status = 2c
Vendor-specific UDID status = f4
Unable to get target data at target 25 LUN 0, status = f4

Probing Target 26 ================================================== ========

Target = 26. LUN = 0.
----------------------
Standard Inquiry failed, status = a58 (SS$_NOMOREDEV)
End of scan for port PGB.
Is OPEN-E compatible with OpenVMS ? Will it be ?