NIC Problems with AT5NM10T-I Mainboard

[TorsteN]

Hope this information (under console) are helpful:

Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)



On another Board:

Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

Revision 03 functions

Greetings TorsteN

[To-P]

We have build-in drivers for Realtek NICs but they don't work well the RTL8111 which isn't actually an server designed NIC.
Give us some time and we will try to prepare something for you.

[TorsteN]

Hello To-P,
thx a lot!

[To-P]

Please take a look at the following KB article:
http://kb.open-e.com/Realtek-Network...Lite_1503.html

This should be helpful.
BR,
Tomek

[TorsteN]

Hi To-P,
thx so much for your speedy assistance but ... i cannot reach the GUI over network (cause i have no NIC functionality) !!!

Is there another way to implement the *.upd file?

BR TorsteN

[To-P]

You can add an additional NIC to reach the webgui and then apply the small update. After that you can reboot the server and remove the NIC.