I had also deleted some snapshots recently
I had also deleted some snapshots recently
de-activated from DSS V6?
I suspect a load on the controller, causing the locks.
as things go forward, time will tell.
I am suspecting hp's firmware. There are some updates to be applied.
It looks like their smart array controller does not play nicely with sata disks.
The confusing part is that they have two different revision numbers for the firmware update. It could be based on the HW revision of the controller: I'll try searching by S/N and see if it is more specific. if not, I'll do a chat session with HP support.
I'll also see if I can budget for all sas disks and rebuild the array/re-install Open-e.
FYI the snapshots I deleted were vm's, not open-e snapshots.
HP has an advisory for the SATA disks and Smart Array controller I was using.
http://h20565.www2.hp.com/portal/sit...4892.492883150
Good find!
Seems either a firmware update on the controller, or firmware updates on the drives themselves can solve the HP issue.