Visit Open-E website
Results 1 to 10 of 10

Thread: Storage Saga So far

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    de-activated from DSS V6?

    I suspect a load on the controller, causing the locks.
    as things go forward, time will tell.

  2. #2

    Default

    I am suspecting hp's firmware. There are some updates to be applied.
    It looks like their smart array controller does not play nicely with sata disks.

    The confusing part is that they have two different revision numbers for the firmware update. It could be based on the HW revision of the controller: I'll try searching by S/N and see if it is more specific. if not, I'll do a chat session with HP support.

    I'll also see if I can budget for all sas disks and rebuild the array/re-install Open-e.
    FYI the snapshots I deleted were vm's, not open-e snapshots.

  3. #3

    Default

    HP has an advisory for the SATA disks and Smart Array controller I was using.

    http://h20565.www2.hp.com/portal/sit...4892.492883150

  4. #4
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    Good find!
    Seems either a firmware update on the controller, or firmware updates on the drives themselves can solve the HP issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •