Visit Open-E website
Results 1 to 10 of 12

Thread: Open-E Will not boot past 59%

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2010
    Posts
    404

    Default

    If severla on/off did not helps, please find the following KB link:
    http://kb.open-e.com/While-booting-D...cent_1743.html

  2. #2

    Default

    Hi there,

    same behavior here, I tried to boot up many times (normal / rescue_mode=no_mount_lv) and always stalled at some point (59 % / Mtxorb [start]), even with all network interfaces down.
    Finally, I have re-installed a system (which has formatted the system partition) (during 5 min). And with auto-save functionality (!!), I succeed to reinject a recent configuration through the web interface. The NAS is now well configured but not for the license key which I do not recover so far.
    In the future, I will never reboot the NAS remotely...

    Bye,
    Joan
    Model: Data Storage Software V6
    Version: 6.0up50.8101.4786 64bit

  3. #3

    Default

    The Product key can be found in your User Portal in the Open-E website when you log in. Or you can send in a support ticket and we will try to find it for you.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  4. #4

    Default

    Quote Originally Posted by joe-farka View Post

    The NAS is now well configured but not for the license key which I do not recover so far.
    In the future, I will never reboot the NAS remotely...

    Bye,
    Joan
    Quick suggestion: If your product is registered on Open-E website, you should be able to get license codes from User Portal -> Warehouse.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •