Visit Open-E website
Results 1 to 3 of 3

Thread: Use Static Discovery instead of Dynamic Discovery in VMware 5.0 settings

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2008
    Location
    Ljubljana
    Posts
    41

    Default Use Static Discovery instead of Dynamic Discovery in VMware 5.0 settings

    Noticed on our ESXi 5.0 hosts:

    I try to enter iSCSI targets by type VirtualIP on Dynamic Discovery, first.
    After rescan process, there are list of all discovered targets on Static Discovery tab.
    Now, I can remove all list on Dynamic Discovery and physical IP targets on Static Discovery list.
    There are only VirtualIP targets left on the Static list.
    It's quite fast and "precise" methode.

    And it should work!?! Yes and NO

    It works till host is restarted.
    iSCSI targets entered using Dynamic Discovery methode are some-how not saved in host initial configuration , but manually entered targets are.
    So don't be lazy and define all targets with manual methode.
    Last edited by Toni Bizjak; 03-03-2012 at 01:45 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •