Hi

I have a questen about the Network configuration for ISCSI Failover

at the open-e Webinars the sample IP Config are:

Virtual IP Storage: 192.168.10.250 and 192.168.20.250. the Storage Client 192.168.10.251 and 192.168.20.251

all Subnet mask are 255.255.255.0

I know that the virtual IP address must be on a different subnet than the physical IP addresses

But is it possible to use a Subnetmask for the Virtual IP like 255.255.0.0 ? (and the physical IP are not 192.168.xxx.xxx )

For a Multipath config at the Storage Client the Client .10.251 can connect to the Storage over .10.250 and .20.250, also the second NIC at the Storage Client. - four way multipath
At the sample Config from the webinar, the Storage Client .10.251 can only connect to the storage over .10.250 and the .20.251 to the Storage over .20.250 - two way multpath

br
Wolfgang