Hi,

I have created a test unit with DSS V6 version 6.0up90.8101.5845 64bit to test connecting to a VMWARE esxi host . I want to test iSCSI storage.

The DSS unit is in demo mode. I have created a volume and presented it through iSCSI manager. I am able to connect to the iSCSI volume using a windows 2008r2 server, so I believe that my basic configuration of NAS and networking etc are correct. I should add that I am not using any authentication at the moment.

In my ESXI host V 5.0.0. 469512 I have created a management port and connected it to the vmnic. I then added the details to the broadcom storage iscsi adapter in my ESXI host. I add the ip address to the iSCSI dynamic discovery tab. Then I check the static discovery and static discovery tab shows the three network adapters. So I think that there must be basic network talk between esxi and nas iSCSI.

When I try to add the storage in the ESXI hosts I ask ESXI to look for a new disk/lun and it finds nothing.
when I check the kernel logs they show many messages of the type


2012-06-22T14:44:04.406Z cpu6:4102)ScsiDeviceIO: 2316: Cmd(0x412400fd43c0) 0x12, CmdSN 0x5085 to dev "naa.600508e000000000c8f01988c64f2401" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.


What am I doing wrong?


thanks in advance

peter