Adaptec RAID 71605Q with maxCache 3.0 - not supported ?

[TomJ]

Well after years of good service I unplugged Areca raid card and installed Adaptec RAID 71605Q.
Ouch! It's not recognized by DSS7.
In hardware setting is just " Adaptec Unknown device 028c (rev 01) ".
According this webcast http://vimeo.com/37887260 I assumed it could be working.

Unsupported or bios misconfiguration ? Ideas ?

Help appreciated.

[Al-S]

The webcast is done with :
RAID controller: Adaptec ASR-6805Q ( Adaptec Series 6 not 7 ).
SSD Cache: STEC MACH16

And as you can check in our compatible list:
http://www.open-e.com/service-and-su...vanced-search/

The Adaptec Series 7 is still not supported yet. But it's in our developing list now, and it should be available soon. The issue is related to Adaptec itself as they start to create a very huge size drivers which cause all it's partners a lot of time to deal with.

[spamx]

Is DSS 7 already supports both controllers Adaptec Series 7Q like 7005Q, 71605Q?

[To-M]

We have a small update for the Adaptec for V7 but for releases that are for up07 and not for up10. We are working on this for either the next release or the one after. If you want the small update send an email to anyone of our moderators.

[gsmail]

Where it is possible to download a patch for ASR 71605Q
DSS v7 Demo

[gsmail]

Where it is possible to download updating for Adaptec 71605Q.
DSS v7 Demo

[Al-S]

The small update files cannot be downloaded, we send them through the support tickets.
Please send our pre-sales team an email with details, pre(dash)sales(at)open-e(dot)com.And mention this Forum post in your email too.

[gsmail]

Here such errors of times in three days and everything falls.
Adaptec 71605Q.
DSS v7 Demo.

At old Adaptec Worked steadily.
Whether it is possible to undertake something?


2013/06/11 21:05:01 I/O Errors detected. To prevent data loss it is recommended to shut... (148/148)
2013/06/11 20:57:26 [297993.980678] Pid: 11898, comm: flush-253:18... (1/1)
2013/06/11 20:57:26 [297993.980680] Call... (1/1)
2013/06/11 20:57:26 [297993.980683] [<ffffffff81138131>]... (1/1)
2013/06/11 20:57:26 [297993.980685] [<ffffffff81138131>]... (1/1)
2013/06/11 20:57:26 [297993.980689] [<ffffffff8104590c>]... (1/1)
2013/06/11 20:57:26 [297993.980692] [<ffffffff81138131>]... (1/1)
2013/06/11 20:57:26 [297993.980695] [<ffffffff8109a8fa>]... (1/1)
2013/06/11 20:57:26 [297993.980697] [<ffffffff8109ac06>]... (1/1)
2013/06/11 20:57:26 [297993.980699] [<ffffffff8109a8f0>]... (1/1)

[To-M]

With I/O Errors detected I would be concerned. Check controller logs and the DSS logs in the dmesg2 logs to see which sdx device is having issues incase you have more then one array.

[gsmail]

We have one array.
May you look and solve problems, we at a stage of adoption of the decision on purchase.
logs: http:// mirror.adman.com/TRL00030_[7637]_logs_2013-06-12_06-53.tar.gz