Rescue config from server console?

[jorgen.hogmalm@benzler.se]

Thx for the info!

Checking for saved configs i see that we created folders for it on one server.
But no files there....
So this is not god no god config backup and data that is important not reachable.

Cant reallly lose the two virtual machines that are on this config so.

Any help.

I have another adapter where on the adapter are the config file located is there possibillity to move them by hand in other enviorment?


Any help would be great!


Best regards
Jörgen

[To-M]

Have you tried to drop the server down then reseat the RAID controller then restart it again?
You can reflash the module with 1.72 w/CDROM, but you will most likely have to change IP and password back to what you had originally.

[jorgen.hogmalm@benzler.se]

Thx for the suggestion!

This raid reseating did nothing.

Had a linux condsultant take a long hard look att this problem.
Installed a linux distrib on th machine to check if the problem was with the machine after all. That was not the case the machine ran smooth, quick and trusty...

So tried to backup info on the DOM hda1, and hda2 was a walk in the park but hda3 that was another thingie...

So after messing around trying to get the config on more than one place (DOM adapter) so did we go down the path suggested.

Made a ISO update of the DOM and the config was as declared saved and worked after the upgrade!

Teh hardware in the machine was configurable again so we could get an ip adress on the nic's again.

The upgrade did as was mentioned wipe the ip adress and password.
But we lost the security parts from the config wich chap user have access to wich resource.
This was not a biggie for us there is only four system using this solution today.

Thanks for suggestions and solution (no word from support on this issue)!!



Best regards
Jörgen Hogmalm

[To-M]

Not sure from last post - are you working now and seeing everything? If so please save all the configurations from the GUI. We have seen your question from our support group.
Let us know if you are able to see everything correctly from the update to 1.72.