After a "crash" of my DSS v6 and XFS_Repair, I have to resync on a AD Domain but always the following error occurs "Database is empty or connection error"
In the logs I have the following messages for the connection with DC server:
"connect_to_domain_password_server: unable to open the domain client session to machine SERVER.DC.HOME Error was : NT_STATUS_NO_TRUST_SAM_ACCOUNT."
Do I have to erase the current Samba Database when resync with DC ?
You dont have to erase the current Samba Database, see if you can connect with PDC to see if you can connect to the ADS server, make sure that you log in as a Domain Admin and verify that in the DSS in the DNS settings you have the ADS server's IP. Also verify correct time on the DSS that matches the ADS servers time.
The IP of the DC is OK and we can ping it. The Administrator account and password are OK.
Also we have checked the DNS IP's (and reachable) and date/time : Everything is OK.
Try to use the PDC to see if your able to get the Users and Groups if you can then this means it is connecting and authenticating, then for the ADS see if there is anything blocking it or check the ADS logs.
At the end customer site, there are two DSS v6 replicated together. One is working properly and is synchronized with the AD domain
and the other one has this issue after a "crash".
So the AD domain, DNS and time are all OK.
I cannot send the logs to the techsupport to analyze further because this DSS v6 has no support contract.