Visit Open-E website
Results 1 to 6 of 6

Thread: No mediums found during install

  1. #1

    Default No mediums found during install

    Hi,

    I'm trying to install Open-E on a new pair of HP G8 DL360-E servers. These have the B320I controllers in them rather than the P420I found in the P model.

    Once I run the installer and accept the agreement I Get an Error "No mediums found".

    Does this mean my controller is not supported.

    Thanks

  2. #2
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    I do not think that is supported. Best thing would be to boot the system from USB and see if anything is detected after booting.

  3. #3

    Default

    Hi,

    Thanks for the prompt reply.

    I installed to usb key and booted. Nothing is visible.

    Going to have to purchase extra hardware or think of another way of doing this.

    Cheers

  4. #4
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    It may be possible to add drivers for this card. For this you will need to submit a support case with the request, and it can be researched.

  5. #5

    Default

    Hi,

    I have the same situation but I try install Open-E as virtual machine under XenServer.. It's possible to run DSS as virtual machine under XenServer, any chance to support that option?

  6. #6
    Join Date
    Aug 2010
    Posts
    404

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •