iscsi FO LUN question

[avizeke]

Hi, Having some issues around accessing and formatting a set data volume, i set 100 GB with a iscsi target, used initiator and ip to detect the the volume name, which came up fine, but formatting ready to use it fails, i get event viewer errors. Its set up to replicate and has a FO and LUN 0 with write-through . Please advise.

event ID 20
Connection to the target was lost. The initiator will attempt to retry the connection.
Event ID 7
The initiator could not send an iSCSI PDU. Error status is given in the dump data.


Thanks

[To-M]

These errors could be from the network side, check for any dropped packets on both sides from the Windows to the DSS. On the DSS side go to the Console screen and enter CTR ALT N then select the NIC and go to Info.