Is there a way to monitor the status of the RAID arrays for my metadata controller?
Hi All,
I have received a number of the following dss7 notifications:
Rebuild of RAID MD0 finished successfuly on host dss7.
/dev/md0:
Version : 00.90.03
Creation Time : Mon May 13 09:19:11 2013
Raid Level : raid1
Array Size : 62522624 (59.63 GiB 64.02 GB)
Device Size : 62522624 (59.63 GiB 64.02 GB)
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Sun Aug 3 03:41:16 2014
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
UUID : 1b543db2:1780f6f5:d0f7558a:99a013ef (local to host dss12743229)
Events : 0.448
Number Major Minor RaidDevice State
0 8 32 0 active sync /dev/sdc S002 (SN: 130979400412)
1 8 16 1 active sync /dev/sdb S001 (SN: 130979401599)
This makes me concerned that maybe the drives in my RAID are dying. Is there a way monitor these drives through the web GUI?
Thanks for the help,
Morgan
If you are using Software RAID function then use the S.M.A.R.T function that is also described in the manual also information can be found in the logs as well under the software RAID.
All the best,
Todd Maxwell
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules