Visit Open-E website
Results 1 to 2 of 2

Thread: Just a question about switching hardware

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Just a question about switching hardware

    I was just wondering. If I had a main board fail could I just move my DSS7 build and raid pack into an identical box, and some how keep all of my previous configuration? Any information on this is much appreciated

    Regards

    David

  2. #2

    Default

    Yes you can, before replacing dropping down the system go to Maint. > Misc and take all 4 options and save the settings.cnf file, you will use this to restore on your new motherboard.

    Keep in mind that the NICs on the new motherboard will have different MAC Addresses and you will have to manually put the IP Addresses on.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •