low write performance use FC target mode

[squawell]

hi everyone~

as title says,i mounted the volume on hp unix for oracle DB,but when oracle create about 5G space usage,it spend about 30 mins,
how can i fix this issue??there is a san switch between open-e and unix....

FC:qlogic qle2652

thanks~

[squawell]

as title say,i create a fc volume through a SAN switch to connect hp unix for oracle usage,when i tried to create a oracle instance space about 5G(for test),it spend 30 mins above
it should not slow like this,i found some posts in this forum,but still no idea,how can i do to fix this issue?

my open-e machine:HP DL380 G5 with 8 SAS 300G disks 12G ram
open-e ver: 6 lite
hba:Qlogic QLE2562 8 G

thanks......

[To-M]

Squawell,

Are you sure you posted this correctly? DSS Lite does not have FC support only the Full version and you posted in the DSS Lite section. If you are using the full version then make sure that you set the blocksize to 512. Also check if you have proper connections and be on the latest version of the DSS V6.