Monitoring open-e with check_mk failing

[To-M]

I will send you the link for the previous build in your inbox, download then update then if your in Failover move the resources over to the other node then reboot and test, if you want you could move the resources back and the others from the other node and update that one as well then reboot and put back the resources and test.

[jlarcombe]

I will send you the link for the previous build in your inbox, download then update then if your in Failover move the resources over to the other node then reboot and test, if you want you could move the resources back and the others from the other node and update that one as well then reboot and put back the resources and test.

Thanks, I downloaded, rebooted, reapplied update for check_mk and rebooted again.

I'm still getting CLI/API: method not found.

Thanks for your help in trying to resolve this so far.

[To-M]

Are you using a LSI controller? Try the API command > get_raidstatus
This returns information about RAID.

[jlarcombe]

Are you using a LSI controller? Try the API command > get_raidstatus
This returns information about RAID.

Nope, HP SMart Array P420I.

Yes that returns same as hpacucli ctrl all show config detail


*-----------------------------*
hpacucli-start ctrl all show status
*-----------------------------*


Smart Array P420i in Slot 0 (Embedded)
Controller Status: OK
Cache Status: OK
Battery/Capacitor Status: OK



*-----------------------------*
hpacucli-start ctrl all show config detail
*-----------------------------*


Smart Array P420i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0

[jlarcombe]

So my command is sound, the key works fine and I have no firewall issues.

So even though the check_mk tool appears as an installed tool is there an issue with it.

Thanks

[Pi-L]

make sure you use latest release of DSS and latest release of check_mk Small Update (2014-09-09, upd_70139c-DSS-V7-up12.upd).
If you still have problems please open a support ticket so one of our guys can help you over remote session.

[jlarcombe]

Hi,

I was running 7.0up16.xxxx.16323 2015-05-29 b16323 but downgraded to try 7.0up12.xxxx.10529 2014-02-21 b10529.

Can you mail me a link for the latest check_mk

Thanks very much