Monitoring open-e with check_mk failing

[To-M]

Are you using a LSI controller? Try the API command > get_raidstatus
This returns information about RAID.

[jlarcombe]

Are you using a LSI controller? Try the API command > get_raidstatus
This returns information about RAID.

Nope, HP SMart Array P420I.

Yes that returns same as hpacucli ctrl all show config detail


*-----------------------------*
hpacucli-start ctrl all show status
*-----------------------------*


Smart Array P420i in Slot 0 (Embedded)
Controller Status: OK
Cache Status: OK
Battery/Capacitor Status: OK



*-----------------------------*
hpacucli-start ctrl all show config detail
*-----------------------------*


Smart Array P420i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0

[jlarcombe]

So my command is sound, the key works fine and I have no firewall issues.

So even though the check_mk tool appears as an installed tool is there an issue with it.

Thanks

[Pi-L]

make sure you use latest release of DSS and latest release of check_mk Small Update (2014-09-09, upd_70139c-DSS-V7-up12.upd).
If you still have problems please open a support ticket so one of our guys can help you over remote session.

[jlarcombe]

Hi,

I was running 7.0up16.xxxx.16323 2015-05-29 b16323 but downgraded to try 7.0up12.xxxx.10529 2014-02-21 b10529.

Can you mail me a link for the latest check_mk

Thanks very much

[To-M]

Check your inbox.

[jlarcombe]

Guess what, it only works.... on both the older and latest kernel.

Thanks very much for your help guys.

Jim