Visit Open-E website
Results 1 to 10 of 26

Thread: Monitoring open-e with check_mk failing

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Monitoring open-e with check_mk failing

    Hi,

    Can you give me any pointers as to where I might be going wrong.

    I have done this before on another pair of servers without a problem. This time it just refuses to work.

    So I have a OMD installation setup. I have Enal;bed api access in Open-e and generated and downloaded the key...which I have placed on my server.

    I have then changed owner to my omd operator. Also set permissions to 500

    Then I su to my user and run command to talk to san.

    I keep getting the following:

    ssh -p 3389 -i A0061921_20150703140738.key -l api 172.16.xxx.xxx check_mk_agent (Im using 3389 because its open on firewall already)

    I get the following:

    CLI/API: method not found

    I have check maintenance and software update to see my minor update has been applied. ADDED: check_mk Api tool.

    I have rebooted also.

    Any pointers would be greatly received.

    I'm running 7.0up16.9101.16323 64bit

    Thanks

  2. #2

    Default

    Hi,

    Does anybody have any pointers they could give. I have tried different ports, further restarts, regenerate keys etc.

    But still I get:

    CLI/API: method not found

    Thanks

  3. #3

    Default

    Are you saying that you are not seeing this feature in our GUI?
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  4. #4

    Default

    Hi Todd,

    I see my Small updates: in MAINTENANCE and Software update

    ADDED: check_mk Api tool

    I see the option to Use CLI/API. I enable with a tick , set port, download key. Transfer key to my Nagios/OMD Install. Change owner to my site and set permissions. su to that site to run the command line...but I get

    CLI/API: method not found.

    I have done this before on another pair of servers without a problem so am reasonably familiar with the steps.

    Thanks

  5. #5

    Default

    Is this with the latest build of DSS V7 Up16? If so any chance you can test with Up12 build 10529? I dont have a Nagios server setup.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  6. #6

    Default

    Quote Originally Posted by To-M View Post
    Is this with the latest build of DSS V7 Up16? If so any chance you can test with Up12 build 10529? I dont have a Nagios server setup.
    Hi,

    Thanks for reply. I worked double shift day before so took day off yesterday.

    Yes I can test no problem.

    Can I just downgrade. I have active/passive sans running. Should I do both at the same time and restart.

    Thanks

  7. #7

    Default

    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  8. #8

    Default

    Quote Originally Posted by To-M View Post
    I used a different article previously but did look at this also when I was having setup issues.

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •