lqqqqqqqqqqqq Volume group selection qqqqqqqqqqqqk
x Select default volume group (system volume x
x will be used on selected volume group): x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x (X) vg00 x x
x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj x
tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu
x < OK > <Cancel> x
mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
i get no choice in the menu.
but vg00 seems already chosen, so it changes nothing in the end.
i added a new disk in the NAS :
//dssA0019718> /c7 show
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-6 OK - - 256K 18626.3 RiW OFF
VPort Status Unit Size Type Phy Encl-Slot Model
------------------------------------------------------------------------------
p8 OK u0 1.82 TB SATA - /c7/e0/slt0 ST32000644NS
p9 OK u0 1.82 TB SATA - /c7/e0/slt1 ST32000644NS
p10 OK u0 1.82 TB SATA - /c7/e0/slt2 ST2000NM0033-9ZM175
p11 OK u0 1.82 TB SATA - /c7/e0/slt3 ST32000644NS
p12 OK u0 1.82 TB SATA - /c7/e0/slt4 ST32000644NS
p13 OK u0 1.82 TB SATA - /c7/e0/slt5 ST32000644NS
p14 OK u0 1.82 TB SATA - /c7/e0/slt6 ST2000NM0033-9ZM175
p15 OK u0 1.82 TB SATA - /c7/e0/slt7 ST32000644NS
p16 OK u0 1.82 TB SATA - /c7/e0/slt8 ST32000644NS
p17 OK u0 1.82 TB SATA - /c7/e0/slt9 ST32000644NS
p18 OK u0 1.82 TB SATA - /c7/e0/slt10 ST32000644NS
p19 OK u0 1.82 TB SATA - /c7/e0/slt11 ST32000644NS
p20 OK - 1.82 TB SATA - /c7/e0/slt23 ST2000NM0033-9ZM175
in the slot23, so what should i do now ? sorry im a bit confused, and stressed to damage something else, that would lose my datas for good, so i ask many questions.
I bet you didn't create new volume group yet, that's why you can't choose it as default one.
Or if you did and the other one is missing then it may be corrupted for good.
If you don't know what you are doing and you have very important data then its really better to handle it over to support people over remote session
Reply With Quote