Visit Open-E website
Results 1 to 2 of 2

Thread: Emulex Issue

  1. #1
    Join Date
    Jun 2016
    Location
    Australia
    Posts
    1

    Default Emulex Issue

    I have installed the trial and cant configure a fiber channel connection for a fiber volume I have setup.

    This is the message

    No Fibre Channel Host Bus Adapter found. All Groups and HBAs settings will be saved but will have no functionality until you plug in appropriate HBA card.

    Hardware status is reports a fc card installed as per below?

    Fibre Channel controllers
    Emulex Corporation Zephyr LightPulse Fibre Channel Host Adapter (rev 02)


    Is this something to do with the trial?

    Thanks
    Chris

  2. #2
    Join Date
    Oct 2010
    Location
    GA
    Posts
    935

    Default

    Only Qlogic FC cards are supported in Target mode.
    http://www.open-e.com/support/hardwa...a-target-mode/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •