Hello,

Wonder if any one has got iscsi targets working with multipath on Solaris 11?

First, I can access my iscsi targets from Solaris fine, but I would like to set up multipath so it works with failover VLANS. At the moment I think I am setting them up correctly, but failover does not work.

My steps:
# cp /kernel/drv/scsi_vhci.conf /etc/driver/drv/scsi_vhci.conf
# diff /kernel/drv/scsi_vhci.conf /etc/driver/drv/scsi_vhci.conf
76a77,79
> mpxio-disable="no";
> scsi-vhci-failover-override = "SCST_BIO", "f_sym";

# iscsiadm modify initiator-node -c 2

# iscsiadm add static-config iqn.2017-10.uk.ac.bbk:dss.solar1,10.63.10.220:3260
# iscsiadm add static-config iqn.2017-10.uk.ac.bbk:dss.solar1,10.63.11.220:3260

# format < /dev/null
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t737A344870495842d0 <SCST_BIO-sz4HpIXB5UdxQ0wW- 220-51.00GB>
/scsi_vhci/disk@g737a344870495842

So it seems to be working, but if I fail the first network it just hangs.

Any ideas?

Andrew