Below are the hardware requirements necessary for our iSCSI versions to operate efficiently. We have seen this happen with lower speed processors. Our specifications, recommendations and support for iSCSI Enterprise support is as follows:
1 GByte RAM, CPU 2.8 GHz or faster. This link provides the Hardware Requirements for the iSCSI Enterprise: http://www.open-e.com/nas/network_at...ow=description . Additionally the iSCSI Enterprise is based on a 2.6 Kernel version, if possible could you please try with a faster processor, as this will also provide additional performance values. You current RAM of 1.5GB is sufficient. Another issue could be that there is a previous partition. I would recommend resetting the DOM back to it’s default condition verify in the Extended tools that there is not any existing VG0 and delete unit after setting back to it’s default condition to verify there is nothing to delete. Also is there a 4GB Swap and 1GB reserved identified in the iSCSI Volume Manager.


ISCSI Enterprise
Hardware Requirements:

- x86 - compatible PC
- 1 GByte RAM
- CPU ( 2,8 GHz or faster)
- Ethernet card
- IDE Port

ISCSI SMB
Hardware Requirements:
- x86 - compatible PC
- 512 MByte RAM
- CPU ( 2,4 GHz or faster)
- Ethernet card
- IDE Port

ISCSI SOHO
Hardware Requirements:

- x86 - compatible PC
- 512 MByte RAM
- CPU ( 2 GHz or faster)
- Ethernet card
- IDE Port