After i installed the 2.30 i go to the console typed ctrl-alt-x and selected the point 10 - "remove partition".
The 3ware Firmware is not the latest, it is 3.08.00.004 and the current on the web is 3.08.02.005, which has only support for new models and a fix for RAID6. I must connect a floppy to update the firmware. Will try tomorrow.
What the test.log says to the netstat -s and ethtool ethx, i don't see there something wrong:
Code:
*-----------------------------------------------------------------------------*
netstat -s
*-----------------------------------------------------------------------------*
Ip:
939354255 total packets received
0 forwarded
0 incoming packets discarded
939354255 incoming packets delivered
324964503 requests sent out
Icmp:
35 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 31
echo requests: 4
35 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 31
echo replies: 4
Tcp:
60171 active connections openings
60306 passive connection openings
0 failed connection attempts
23 connection resets received
49 connections established
939343091 segments received
324956798 segments send out
221 segments retransmited
0 bad segments received.
686 resets sent
Udp:
10944 packets received
0 packets to unknown port received.
0 packet receive errors
7668 packets sent
TcpExt:
59746 TCP sockets finished time wait in fast timer
144181 delayed acks sent
275 delayed acks further delayed because of locked socket
Quick ack mode was activated 217840 times
50422 packets directly queued to recvmsg prequeue.
11156301 of bytes directly received from prequeue
864295031 packet headers predicted
22820 packets header predicted and directly queued to user
19737188 acknowledgments not containing data received
22681705 predicted acknowledgments
2 times recovered from packet loss due to fast retransmit
10 times recovered from packet loss due to SACK data
Detected reordering 2 times using time stamp
2 congestion windows fully recovered
61 congestion windows partially recovered using Hoe heuristic
60 congestion windows recovered after partial ack
0 TCP data loss events
1 timeouts after SACK recovery
10 fast retransmits
1 forward retransmits
202 other TCP timeouts
163 DSACKs sent for old packets
1 connections reset due to unexpected data
*-----------------------------------------------------------------------------*
ethtool eth0
*-----------------------------------------------------------------------------*
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes
*-----------------------------------------------------------------------------*
ethtool eth1
*-----------------------------------------------------------------------------*
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: yes
*-----------------------------------------------------------------------------*
ethtool eth2
*-----------------------------------------------------------------------------*
Settings for eth2:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: yes
*-----------------------------------------------------------------------------*
I wrote a long mail to the support and will call them tomorrow to talk about this Problem. I hope at phone we find a solution...
Regards
Stefan