-
I tested some things:
Used a additional Reaktek GigaBit NIC, but the IOMeter read speed was only 7 MB/s and the write speed like the Intel NIC at 40 MB/s.
I tested with the multiprocessor and sigleprocessor testing kernels, but all the same...
I updated the Firmware of the 3Ware to the last one, but no change.
Some questions:
- What is the better enviroment: Direct links from the target to the initiator with a single cable or is it better to use a switch.
- Can i test the network performance from the initiator to the target and ignore the performance of the raid?
- What must i do to configure the NIC to 1000 FullDuplex fix, no autodetection.
Regards
Stefan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules