Visit Open-E website
Results 1 to 8 of 8

Thread: update problems

  1. #1

    Default update problems

    Can't update to n20070921s.132_b2854.dss-bas.generic.iso, there is an error while uploading .iso: "Uploaded file is missing or file is empty."
    Current version is:
    Version: 1.30.DB00000000.2819
    Release date: 2007-08-24
    Licensed Storage Capacity: 24 TB

  2. #2

    Default

    Check the md5 or make sure the ISO file size is the same from download (exact size is 259063808).
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    same problem with n20071121s.137_b2922.dss-bas.generic.iso
    md5 and file size are ok

  4. #4

    Default

    Are you updating using the CD-ROM process or on the GUI? Try with CD-ROM. Is DSS set to 32bit or 64it? If this does not work I will need you to send in logs to support@open-e.com as we may have a small update to apply first before new updates.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  5. #5

    Default

    I have TigmaStor 24000 Storage Server 4U with no CD-ROM on board
    So I'm trying to update through GUI by uploading iso image. Server works in 64-bit mode.

  6. #6

    Default

    Same problem with online update. It downloads file and then writes "Error"

  7. #7

    Default

    Any chance to plug in a CD-ROM. I know that the system does not have one installed but the motherboard should have an IDE port available. If not send email to support with the log file from Status > Hardware > Log then click on the Download button. Do you have any running Snapshots? If so try deactivating them and try again.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  8. #8

    Default

    Update worked after removing log files, strange.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •