no iso update found v2.10 to v2.32

[Kinderjoy]

Hello,
I just tryed to update iscsi r3 enterprise from v2.10 to v2.32 (to v2.11 and to v2.30 also) and i always get System corrupted No iso update found.

So far burned 3 cd's and all gives me the same error.

Any ideea on why did is happening ?

[To-M]

Not sure why, check the ISO size from download and do a md5 check. Try moving the USB to another USB pin port on the motherboard or different system. If this does not work send issue to support requesting RMA. You can use the Demo-CD in the meantime to keep going. Always save your settings.

[Kinderjoy]

The motherboard has only 1 place where i can put the open-e usb stick.
and i've used the onboard usb for the cdrom to bootup.

I'll try with an ide cdrom tomorrow...

[To-M]

use the cable that came with the USB as you only use 4 pins.

[Kinderjoy]

fixed with ide cdrom.
weird..
anyway got to v2.32 now.. hope the webupdate "not working" won't happend again