No GUI Access after Sofware Update

[zernik]

No chance from any browser. I can ping the server on 192.168.0.1. On the default 192.168.0.220 and 192.168.1.220 there is no response.
The share is still accessable, I can deal with the data on it.

[To-M]

Are you using certificates? If so you can reset them from the Console Tools CTRL + ALT + T then select "Time Configuration" just take the defaults to the end. If that does not work then reset the network settings again in Console by entering CTRL + ALT + I then go back and change your IP Address, Subnet, Gateway and DNS (If need be) by entering CTRL + ALT + N. Does this happen with other systems from the network as well?

[zernik]

OK, I got it. It was the installed certificate in IE from open-e. It seems that the old certificate was not the same as after the software update. But IE only showed that the page couldn't be found.... Very strange.

Paul

[zernik]

But now I have another problem...

After the update, I have problems with the error message functionality. I can see that there are any messages, but when the message window opens, I can't see anything there.

Any ideas?

Paul

[To-M]

Are you using I.E. or Firefox ?

[zernik]

IE...
That's why I had the other problem above, too.

Paul

[zernik]

It's IE 7 on vista.