Problems with QLA2462

[Raudi]

Since when is the QLE2462 supported in Target mode? On the Open-E Web-Site this is not listed and because this i got a QLA2462 (PCI-X).

And have you tested with a 64 Bit kernel? In 32 Bit the controller was found in Target mode...

Best regards
Stefan

[To-M]

It is listed.

http://open-e.com/data_storage_solution/server/service_and_support.php?lang=en&subserv=prodcomp&h ardkind=Fibre%20Channel%20HBA<br>%20(target%20mode )

[Raudi]

Call me stupid, but i see only QLA Controllers and not a QLE...

QLA2462 -> PCI-X
QLE2462 -> PCI-Express

Best regards
Stefan

[Raudi]

http://open-e.com/data_storage_solut...anufact=QLogic

The QLE2462 is only listed for Initiator mode...

[To-M]

Typo on my end, I meant my target is a QLA2462 and initiator QLE2462 tested with directly attached and with the Sanbox 5600.

[Raudi]

O.k. Please can you check with a 64 Bit kernel in Initiator mode? In the Build before (2922) the controller was found...

Best regards
Stefan

[To-M]

I'll be out for the holidays and will test when I get back - any one else that can test this with 64bit and build 2854.