Visit Open-E website
Results 1 to 10 of 15

Thread: Problems with QLA2462

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2007
    Posts
    84

    Default

    Call me stupid, but i see only QLA Controllers and not a QLE...

    QLA2462 -> PCI-X
    QLE2462 -> PCI-Express

    Best regards
    Stefan

  2. #2
    Join Date
    Jun 2007
    Posts
    84

    Default

    http://open-e.com/data_storage_solut...anufact=QLogic

    The QLE2462 is only listed for Initiator mode...

  3. #3

    Default

    Typo on my end, I meant my target is a QLA2462 and initiator QLE2462 tested with directly attached and with the Sanbox 5600.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  4. #4
    Join Date
    Jun 2007
    Posts
    84

    Default

    O.k. Please can you check with a 64 Bit kernel in Initiator mode? In the Build before (2922) the controller was found...

    Best regards
    Stefan

  5. #5

    Default

    I'll be out for the holidays and will test when I get back - any one else that can test this with 64bit and build 2854.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  6. #6
    Join Date
    Jun 2007
    Posts
    84

    Default

    o.k. i wish you and all the others a merry christmas!

    Stefan

  7. #7
    Join Date
    Jun 2007
    Posts
    84

    Default

    Yesterday in activated the previous version and FC in Target mode works. But i can't access te LUN from ESX. I can't create a vmfs or a rdmp...

    - When i want to create a VMFS, igot a message that tha partition can't be read.

    - When i want to create a RDMP i got this messages in the log:

    Task Created : haTask-1344-vim.VirtualMachine.reconfigure-1785
    State Transition (VM_STATE_OFF -> VM_STATE_RECONFIGURING)
    Could not get canonical path for /vmfs/volumes/.../srv08/srv08.vmdk: No such file or directory
    DISKLIB-LINK : "/vmfs/volumes/.../srv08/srv08.vmdk" : creation successful.
    DISKLIB-VMFS : "/vmfs/volumes/.../srv08/srv08-rdmp.vmdk" : open successful (17) size = 312552194048, hd = 0. Type 10
    DISKLIB-VMFS : "/vmfs/volumes/.../srv08/srv08-rdmp.vmdk" : closed.
    DISKLIB-VMFS : "/vmfs/volumes/.../srv08/srv08-rdmp.vmdk" : failed to open (2490377): AIOMgr_Open failed. Type 10
    DISKLIB-DSCPTR: Failed to open extents for descriptor file in normal mode
    DISKLIB-LINK : "/vmfs/volumes/.../srv08/srv08.vmdk" : failed to open (Function not implemented).
    DISKLIB-CHAIN : "/vmfs/volumes/.../srv08/srv08.vmdk" : failed to open (Function not implemented).
    DISKLIB-LIB : Failed to open '/vmfs/volumes/...0/srv08/srv08.vmdk' with flags 0 (Function not implemented).
    Foundry operation failed with system error: Function not implemented (38), translated to 1
    Failed to get result state: CreateBacking: Error: Internal error
    Event 39 : Failed to create virtual disk /vmfs/volumes/.../srv08/srv08.vmdk Reconfigure failed

    And when i try to low level format the disk from the hosts QLogic BIOS i got an error too. But verify works.

    Best regards
    Stefan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •