Visit Open-E website
Results 1 to 8 of 8

Thread: What is the latest version of NAS 2.0

  1. #1

    Default What is the latest version of NAS 2.0

    I have a NAS 2.0 module with;

    Model: Open-E NAS
    Version: 2.67.000000000.1711
    Release date: 2006-03-24

    But looking at the updates, they are all older.

  2. #2

    Default

    I'm asking this because i have the following (i think) hardware driver related problems;

    1) During booting i get the following messages;

    Loading...
    PCI: Unable to handle 64-bit address space for
    PCI: Unable to handle 64-bit address space for device 03:01.0
    PCI: Unable to handle 64-bit address space for
    PCI: Failed to allocate resource 0(0-0) for device 03:01.0

    Moving the 3Ware 9550SX to another PCI-X bus changes the "device 03:01.0" to device 03:02.0)

    2) When booted and i'm logged in the web interface going to status->hardware i see at controller info;

    RAID/SCSI controllers
    3ware Inc: Unknown device 1003

    3) When there is no raid config created the controller is not recognized and the 3DM tools are not available. When a raid config is created in the bios the controlller is recognized and the tools are available.

    My server hardware configuration is;

    Intel Entry Server Board SE7221BK1-E mainboard (bios version P07) with 1Gb ram and a Celeron D 2.66Ghz CPU
    3Ware 9550SX-8LP controller (version 9.3.0.3)

  3. #3

    Default

    A more recent version is located below. Please go to FTP site to download updated ISO. Please read all instructions on how to update the NAS 2.0.

    ftp.open-e-com
    user: software
    pass: enterforupdate

    ftp://support:enterforupdate@ftp.open-e.com

    or

    ftp://ftp.open-e.com/NAS%202.0/black...mb_v268_b1877/
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  4. #4

    Default

    Are you receiving the PCI error messages after POST and before the Open-E Screen appears?

    If you create a RAID set from the 3Ware controller are you able to see in Disk Manager the assigned VG0? If you are can you then create a LV00 and access the Share?
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  5. #5

    Default

    I'm receiving the PCI error messages after POST and before progress bar. When I create a raid set. I'm able to see the assigned VG0. I can create a LV and create the share. Also the 3DM tools are available.

  6. #6

    Default

    After updating to 2.68... I get the following during boot;

    Loading...
    PCI: Failed to allocate resource 0(0-0) for device 03:01.0

    It looks like the error details are less.

  7. #7

    Default

    To better help you could you send the logs to support@open-e.com.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  8. #8

    Default

    I will send the logs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •