Visit Open-E website
Results 1 to 10 of 45

Thread: webgui with blank screen

Thread has average rating 4.73 / 5.00 based on 11 votes.
Thread has been visited 639745 times.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    If using I.E. try to clear the certificates or try to clear the cache of Internet Explorer.

  2. #2

    Default

    I am having this problem too. The web panel was working fine(but slow) before. Just now, I want to create a new volume. Usually, it takes a few seconds to create the volume, but this time it hang there even after 10 minutes. Since I can't do anything, I just left that page. Now, the web panel is completely blank. I've tested on different computers and browsers. I still can ping the web panel IP though.

    I am using 6.0up85.8601.5794 64bit, the OS is installed on a decent hardware

    Memory (RAM) info
    used Used memory (MB): 2396.68
    cache System cache (MB): 45651.73
    free Physical free memory (MB): 239.56

  3. #3
    Join Date
    Aug 2010
    Posts
    404

    Default

    Some browsers ( with their latest builds ) has some issues, so sometimes using an older version of browser can help.

    Sometimes you need to check your File System, by the repair tool to be sure that it contain no issues, as if there are any issue with the FS, then creating a new volume may take a longer time, and it's not recommended to keep working with a FS that contain issues. to check it, you can run \"Repair file system on LV (Logical Volumes)\" in Console Tools mode, after pressing (ALT+CTRL+X).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •