webgui with blank screen

[HofMar]

All the same. I've tried it with IE and FireFox. Any other idea?

[To-M]

Can you check with another system maybe some popup blocker or firewall program might be preventing this access to our GUI. Can you ping from the Console tools by accessing CTRL + ALT + T then select the ping option. Also you can reset the certificates by selecting the Time configuration option "0" and just select the defaults.

[HofMar]

I've tried it from other systems, too. It's not a problem from a firewall or a popup blocker. I use a clean firefox installation with no plug-ins!

Pings from outside are replied. From Inside i don't tested it. I do it later.

I think the reset from the certifitate have a done when i look for the correct time settings. He ask me about. I have also tried the "factory default settings".

[To-M]

Just to make sure I understand correctly you are installing Open-E DSS lite in a VM?
If so can you please test DSS LITE by itself without VM.

[HofMar]

Yes, i've installed Open-E DSS lite in a VM. At this moment i can't test it without VM. Is there a problem to run in a VM?

[To-M]

It may very well be the issue as we have not tested this within a VM. Even in our professional versions this will not work.

[pebras]

I have a similar problem with the Open-E DSS lite just like HofMar. The installation on an USB-Stick, the configuration of the IP-Address, Pings from outside/inside and the console don't cause any trouble, but if I try to connect on the webgui with https, it only shows a blank screes after accepting the certificat.

This occurs on Windows as well as on Linux with all kinds of Browsers (Firefox, IE, Opera, etc.)