webgui with blank screen

[idicos]

Athlon with VIA Chipset, 5 HDs, detected perfectly, 2 Network Cards, both detected perfectly. Console just fine. But no WebGui. Neither card is working though. Tried "reset cert" already. Too sad...

Regards,
Mike

[a93h201]

I too am having an issue with DSS lite

Iomega NAS P410
Duel Intel 100 Pro NIC
1GHz PIII
512MB
4x 120GB ATA HDD
1x 4GB Samsung CF 150x in IDE CF adapter

Boots and pings from console, but wont connect from HTTPS just a blank page

There is an error on statup to do with the change.img something about not being able to load it in to memory

[To-M]

Try increasing the Hardware Requirements:
- x86 - compatible PC
- 1 GByte RAM
- CPU (3 GHz Pentium IV or faster are recommended)
- HDD (SATA, SAS, SCSI, ATA) / RAID / Fibre Channel / iSCSI Storage
- Network Interface Card (multicards 1Gb/s recomended for bonding)
- USB-Memory-Stick, USB-DOM (Disk On Module) or "pen drive"

http://www.open-e.com/free