Visit Open-E website
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 45

Thread: webgui with blank screen

Thread has average rating 4.73 / 5.00 based on 11 votes.
Thread has been visited 471144 times.
  1. #31

    Default Count One More

    I too, have the same issue with a blank web gui. It pretty much made it impossible to activate this in time to test. Well, maybe you will get the issues worked out and will offer another chance to try again for those of us that couldn't get this to work. After all of this, it would have been just easier to build NAS from Linux, I think. I am giving up on this and going to bed @ 01:15.

    Best Regards,
    Dan Pueppke

  2. #32
    Join Date
    Jan 2008
    Posts
    82

    Default

    I tried it again around 3PM mountain US time. And I register, activate and it works.. ofcource I didn't try all function but GUI works.. !!!!

    can you guys ping? Is it kerbros in windows? firewall?

    I dont know.. but it works for aloooooot of users!

  3. #33

    Unhappy No WebGui here as well

    Athlon with VIA Chipset, 5 HDs, detected perfectly, 2 Network Cards, both detected perfectly. Console just fine. But no WebGui. Neither card is working though. Tried "reset cert" already. Too sad...

    Regards,
    Mike

  4. #34

    Default

    I too am having an issue with DSS lite

    Iomega NAS P410
    Duel Intel 100 Pro NIC
    1GHz PIII
    512MB
    4x 120GB ATA HDD
    1x 4GB Samsung CF 150x in IDE CF adapter

    Boots and pings from console, but wont connect from HTTPS just a blank page

    There is an error on statup to do with the change.img something about not being able to load it in to memory

  5. #35

    Default

    Try increasing the Hardware Requirements:
    - x86 - compatible PC
    - 1 GByte RAM
    - CPU (3 GHz Pentium IV or faster are recommended)
    - HDD (SATA, SAS, SCSI, ATA) / RAID / Fibre Channel / iSCSI Storage
    - Network Interface Card (multicards 1Gb/s recomended for bonding)
    - USB-Memory-Stick, USB-DOM (Disk On Module) or "pen drive"

    http://www.open-e.com/free
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  6. #36

    Default same here with installation on IDE2CF Adapter SSD

    I have the same problem. Console ist running fine. 192.168.0.220 ist listed in the routers connected devices. Ping works fine. When calling http or https the system ist asking to accept the Certificate. After that, blank page with no Source code at all is displayed.

    I have installed NOT in VM but on a IDE2CF Converter, as Salve Device on primary IDE Controller.
    Boris Erdmann-Jesnitzer

  7. #37

    Default

    forgotten to post the System:

    Bank webgui for a system:

    FSC Scaleo
    CPU P4 2 GH
    1,2 GB RAM
    80 GB WD IDE As Master on IDE0 as Master
    IDE2CF Converter as System Device on IDE as Slave

    So I met the hardware requierments. (altough I can not imagine that having an 1 GH processor keeps the system from working...)
    Boris Erdmann-Jesnitzer

  8. #38

    Default

    Check Date and Time - maybe certificate was generated for WebGUI and is not valid for your time settings.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  9. #39

    Unhappy different download

    I have the same problem, that the webGUI doesn´t show anything.

    could their be a different download?
    I have read about 2TB limitation. Can someone give me a link to this download?

    thanks,
    Fitz

  10. #40

    Angry

    Hi,

    I have DSS lite installed on a 1GB Flash card in a IDE adapter, in an IBM 5100 11Y Netfinity server.
    1.7GB RAM
    2x 667Mhz PIII
    IBM ServRAID L4
    100GB RAID 5 Ultra 160 (4x 36gb 10k scsi)

    Now i know the CF card and an IDE adapter is not the recormended path, but i have tested the card in a Dell Optiplex GX520 (Intel D core) and it worked fine. I have also tested it via a USB card adapter on my HP nx6325 laptop (AMD Turon 64 x2).

    The same install worked fine and after changing the static IP to 10.100.3.4 the web GUI was accessible.

    When installed in the IBM box there is an error on boot, ilegal argument, but this does not stop the boot to the config screen.

    System is ping able, and will ping out too.
    System time has been reset and a new certificate generated.

    Error on the WebGUI is certificate from 127.0.0.1. accept and you just get a white page. refresh the page and you get page can not be found in IE and in Firefox you get the white page still.

    Any ideas?

    Help????


    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •