No Units with Adaptec 2230S on DSS Lite

[To-M]

Is the RAID still working on the RAID that you have created or is it completed? If this is the only storage set in the DSS LITE try just creating with single drive. Also did you test with DSS not iSCSI-R3 as there are recent updates with the DSS Demo. You should be able to use the Adaptec software to see the RAID. We should be able to connect with the Storage manager, try these steps below also check that firewall is not blocking port. If this does not work try recreate the RAID again or just to test just use one drive. Is the firmware up to date on the Adaptec. After that we need to see the log files of the Demo-CD logs.

1. In Adaptec Storage Manager push Add button to add next managed system
2. Leave type "Managed system (Internal RAID)" and port "34,571"
3. Enter "192.168.93.92" (your Open-E server IP) in Host name/IP addres
4. Enter "raid" in "User name" and "Password" entry.
5. Push connect.

[errolDC]

Okay, I updated the BIOS for the Raid card and that seems to have resolved my issues..