Visit Open-E website
Results 1 to 8 of 8

Thread: Software RAID creation issue

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default

    Others have reported with approx 72000K/sec (but very good drives, mem and CPU). Maybe others can supply some perf. values with SATA in "ENHANCED" modes.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  2. #2

    Default

    We are happy with 60000K/s, it's a backup device on S/W RAID5, and we can get over 40MB/s average on NFS, which is impressive enough.
    What puzzles us is that we have to enable Intel RAID on M/B, otherwise LITE sees no units.
    Maybe it's just this M/B model. By the way, under M/B RAID mode, SATA enhanced mode is default.

  3. #3

    Default

    I'm very new and still demo'ing open-e but I stumbled upon this post and wanted to throw my S/W RAID5 build performance numbers into the ring.

    SuperMicro Superserver 6015V-MT
    1x Xeon 5120 Woodcrest (dual-core 1.8)
    2GB DDR2 667mhz
    Onboard SATA controller
    4x 1TB Western Digital SATA

    We're getting sustained resync (build) rates of over 80,000K/sec, building out that 4TB array in a little less than 3 hours.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •