Visit Open-E website
Page 1 of 2 12 LastLast
Results 1 to 10 of 39

Thread: USB boot ISO

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default USB boot ISO

    I saw in the DDS forum http://forum.open-e.com/showthread.p...light=usb+boot that there exists a "USB BOOT ISO assist the USB DOM incase of BIOS not assisting the boot from the USB DOM"

    Is there any way this ISO can be made available to DDS Lite users? evan for a price?

  2. #2

    Default

    Check your email for access to this. This ISO BOOT CD was designed for DSS and R-3 version and not tested with DSS LITE.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    I have the same problem. Is it possible to get the ISO as well.

    Thanks

  4. #4

    Default

    OK, I tried the USB boot ISO. Although it does seem to work with the DSS Lite, it doesn't do what I want it to do. It does not work with a motherboard that doesn't already recognize the USB module.

    I tried on 4 diferent old mother boards that will not boot from USB - well the CD boots and everntually presents a message saying: "No USB module found" and that's as far as it gets. And yes the flash drive was plugged in to the USB slot and the light was on indicating it had power at least.

    I also tried it on a newer laptop. I set it to boot from CD and it did and then continued to load the DSS and I got the console screen telling what my IP address is etc, so that worked. But what's the point - that laptop boots just fine straight off of the USB module without needing help from the CD. I suspect this helper CD is for certain cases on newer machines that do see the USB drive directly but just don't allow it to boot.

    If anyone figures out how to boot and use the USB module on a machine where the bios doesn't see the USB disk. I'd sure like to find out how you did it.

  5. #5

    Default ISO to boot DL380 G3

    I have the same problem. Is it possible to get the ISO as well?

    Thanks

  6. #6

    Default

    Quote Originally Posted by To-M
    Check your email for access to this. This ISO BOOT CD was designed for DSS and R-3 version and not tested with DSS LITE.
    Hello Todd,

    Is the ISO still available? I want to use this on an order system that barely even know what USB is.

    TIA....

  7. #7

    Default

    Sure, send me an email and I will direct you
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  8. #8

    Default

    Quote Originally Posted by To-M
    Sure, send me an email and I will direct you
    Is there a way for me to send you an address without posting it in the forum?

    Thanks

  9. #9

    Default

    Quote Originally Posted by Harvin
    Is there a way for me to send you an address without posting it in the forum?

    Thanks

    Strike this I figured out how to send it privately.

  10. #10

    Default

    Hallo,

    I have the same problem. Is it possible to get the ISO as well.

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •