No units

[rogierbanis]

We have a DOM-USB with OPEN-E DSS 5.0.DB39000000.2956 (NFR) placed in a brant new Intel SSR212MC2 with 4x750Gb SATA disk.

We have no hardware raid and do not want to use the software raid from the intel board but wanne use the software RAID from DSS.

When we boot the system everything looks OK but when we doa a C-A-K or login to the webinterface we have NO disk units.
When we look into the software raid module of the motherboard we do see all 4 disks so we are sure that they are properly inserted and working.

BTW we are a new OPEN-E partner.

Kind regards,

Rogier Banis
Ningaloo Network Solutions BV

[Ke-S]

Please change your onboard SATA mode to "enhanced" and enable "AHCI mode". This should fix your problem with disk.