WebGUI not accessible

[Pascal]

Regrettably none of the suggestions have helped.
When I select the RESCUE MMODE I get the following message: "Your CPU does not support long mode. Use a 32bit distribution." In the basic grub menu I've selected 32bit, but that has the same result.

[Lucky]

Have you try it on other hardware ??

[Pascal]

Don't have any other hardware to try it on, regrettably....

[DSSpower]

Have you already checked you cabling and your ethernet configuration.

Maybe on your switch are some ports blocked or something like that. Just try to use a simple network area.

Server - Switch - OpenE

[Saro's]

Hi, i have the same problem with an R3 NAS, 4.01 version. I can't access to the Web GUI, from both web browser (IE6, 7 or Firefox).
The first page was correctly showed but there isn't the login form (username and password).

Now, i try to replace the DOM with another (version 5.0) and i would to know if there should be problems with my data after replacing.

Thank's

[To-M]

You will not lose your data by replacing modules and you can use the Demo-CD as well to keep going in case you need to RMA. I always recommend to save your settings from GUI.

[Pascal]

After trying every possible option (direct connect, different browsers, accessing from different systems like Windows and Linux) I decided to take an older version of the software, which had already proven to work in the past and installed that from CD.

Now I can access the WebGUI again and manage the NAS, but I'm back to version 4.21.NE00000000.2745

Still baffeled about the cause of all the problems. Hopefully a solution will come in a future update.

[toepytoe]

From the console try resetting the nic to the defaults. check that the time settings are correct