WebGUI not accessible

[Pascal]

Don't have any other hardware to try it on, regrettably....

[DSSpower]

Have you already checked you cabling and your ethernet configuration.

Maybe on your switch are some ports blocked or something like that. Just try to use a simple network area.

Server - Switch - OpenE

[Saro's]

Hi, i have the same problem with an R3 NAS, 4.01 version. I can't access to the Web GUI, from both web browser (IE6, 7 or Firefox).
The first page was correctly showed but there isn't the login form (username and password).

Now, i try to replace the DOM with another (version 5.0) and i would to know if there should be problems with my data after replacing.

Thank's

[To-M]

You will not lose your data by replacing modules and you can use the Demo-CD as well to keep going in case you need to RMA. I always recommend to save your settings from GUI.

[Pascal]

After trying every possible option (direct connect, different browsers, accessing from different systems like Windows and Linux) I decided to take an older version of the software, which had already proven to work in the past and installed that from CD.

Now I can access the WebGUI again and manage the NAS, but I'm back to version 4.21.NE00000000.2745

Still baffeled about the cause of all the problems. Hopefully a solution will come in a future update.

[masim]

Try to update to latest version 5.0... It should work fine.

Let us know how its going..

[Pascal]

I originally had version 5.0 and that was the cause of all my problems (and this thread). I've also reflashed the DOM with ver 5.0, which didn't work.
Now back to ver 4.21 it does work. So I'm not going to install ver 5.0. A newer version would be a possibility, but definately not the current 5.0

[toepytoe]

From the console try resetting the nic to the defaults. check that the time settings are correct