Feb 24, 2008 10:01.21AM (0x04:0x002B): Verify completed: unit=1
Feb 24, 2008 09:13.36AM (0x04:0x0029): Verify started: unit=1
Feb 24, 2008 09:11.58AM (0x04:0x0008): Unclean shutdown detected: unit=2
Feb 24, 2008 09:11.58AM (0x04:0x0008): Unclean shutdown detected: unit=1
On Unit 1 the controller made already a verify. Unit 2 is a single drive. On Unit 0 i will start a verify too but this will take a while, this are 4,7 TB...
Can this cause that the complete system didn't resonse?
Today night the system freezes again. This time i tryed to make a backup of all my shares. I used ARCserve 12 and not the agent of the DSS, i made the backup using the shares.... After 200GB and at exact 2:00 the system freezes.
I hope i stoll got my data on tape, i must store for a complete backup 2,5 TB to migrate the data to a new storage.
Today my new Promise VTrak arrives and i removed one RAID from the DSS to put the disks to the VTrak. I made this step by step: First unmapping the iSCSI, then i deleted the partitions and then i removed the disks from the 3ware GUI. After i rescanned from the DSS the device was gone. All works fine.
A little bit later i can't access the files on the CIFS shares. The Web GUI is accessable but shows not all informations so i initiated a reboot from the console. It takes a while to shutdown and after the machine made a reset the DSS writes LOADING... and the i got a message that the System corrupted is and that no USB DOM can be found.
Now i also put the disks with tha NAS data in the VTrak, assigned them to a Windows Server and made a restore of the data...
When i have a little bit more time at weekend i will look if i can boot the DOM in a different Mainbord if not i think that i must contact the support...
Senior Member
Posting Permissions
Reply With Quote