Visit Open-E website
Results 1 to 3 of 3

Thread: 3ware controller setup missing in 3009

  1. #1

    Default 3ware controller setup missing in 3009

    I recently updated to iSCSI R3 5.0.IE42000000.3009 and noticed that the admin interface for the 3ware controller is now gone. When I go under Setup, H/W RAID I get a "No H/W RAID controllers found". When I go under Status, Hardware I see a 3ware Inc 9xxx-series SATA-RAID controller under RAID/SCSI controllers.

    Anything special I need to do to gain access to the 3ware admin interface as in the previous iSCSI-R3 release?

    Thanks

    Craig

  2. #2

    Default

    Just tested with an upgrade from 2.32 to build 3009 with a 9650 and was ok. Try re-flashing again with CD to see if this helps.
    All the best,

    Todd Maxwell


    Follow the red "E"
    Facebook | Twitter | YouTube

  3. #3

    Default

    Thanks Todd. I just did a cold reboot (rather than a reboot from the UI) and the 3ware button is now available...

    Craig

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •