Demo fails to boot

[FarEdge]

Im giving the DSS demo a whirl.

Box is a Intel Core2 Duo.
NIC: Intel GB NIC
RAID Card: 3Ware 9650SE-8LPML
Model: 9650SE-8LPML
Firmware: FE9X 3.08.02.007

5 x 1TB Seagate drives in it in RAID6.

When I boot from the demo cd all I get is an error which says:

System Corrupted
Error Number 0x500

The FAQ offers no suggestions.
While I await a response from support@open-e.com I figured it wouldnt hurt to post here and see if anyone has any suggestions.

[To-M]

You should be recieving a response from them. If not let me know.

[FarEdge]

Short version: "Our mobo is not supported".

The box im using to eval with has an Asus P5E-V HDMI motherboard:
http://au.asus.com/products.aspx?l1=...29&modelmenu=1
It has an Intel G35 chipset.

Strangely this was NOT mentioned on the HCL over at
http://www.open-e.com/data_storage_s...nd=Motherboard

I shall attempt to locate a less new motherboard to test with.