XenServer on DSS or Openfiler

[mxcreep]

HA Bonding is supportet in the new 4.1 Release of XenServer (via CLI).

We use 2 XenServer 4.1 Hosts with two DSS Lite Open-E Servers as ISCSI-Targets. The performance is very good.

HA bonding is supported indeed...but only mode 1, failover...and that mode doesn't provide extra throughput.

I guess you don't really need a lot of io performance for your applications as the maximum throughput would be a 100MB/s. In terms of SAN performance this isn't really fast. We have tested iscsi as well using a Equalogic PS300E unit that was easily able to fill the Gbit line to the max, but when cloning some templates and also having some guests doing IO all slowed down during the cloning operations.
All of our Xenserver boxes have 64GB RAM and run a lot of guests...this isn't doable using one Gbit iscsi connection.

Open-E for itself seems to perform ok...it's a bit slower than the Equalogic but the pricing is different as well. We have also thought about 10Gbit interfaces, but at the moment 12/24 port 10Gbit switches are still very expensive. For myself I would like to give infiniband a try since this is less expensive and has greater bandwidth...

At the moment we're fiberchannel solution that provides enough bandwidth to each host. However this is less flexible than using a solution like Open-E combined with fast hardware.

Best thing to do would be downloading the lite version or the demo and give it a try for yourself...

[SeanLeyne]

...Open-E for itself seems to perform ok...it's a bit slower than the Equalogic but the pricing is different as well. We have also thought about 10Gbit interfaces, but at the moment 12/24 port 10Gbit switches are still very expensive. For myself I would like to give infiniband a try since this is less expensive and has greater bandwidth...

Are you sure that Infiniband is faster than 10Gb? My research shows that they run at exactly the same speed, both at a hardware and throughput level.

As for pricing, your right about that; a Fujitsu XG700 12 port 10Gb CX4 switch has a street price of $7600 USD, while a Qlogic 9024 SilverStorm 24 port switch can be had for $4000.


Sean

[mxcreep]

Are you sure that Infiniband is faster than 10Gb? My research shows that they run at exactly the same speed, both at a hardware and throughput level.

As for pricing, your right about that; a Fujitsu XG700 12 port 10Gb CX4 switch has a street price of $7600 USD, while a Qlogic 9024 SilverStorm 24 port switch can be had for $4000.


Sean

Infiniband is also available in 20Gbit versions at this time...but you shouldn't just compare it's networking speed as the protocols used to transport data differ from each other. Infiniband uses a scsi command protocol directly transported over the network connection while iscsi uses the tcp/ip layer. I would suggest to read some about it and compare pricing...you will see infiniband is a great option compared to 10GBe.

[To-M]

Hey Guys!!

Yes I know long over due but we now have the DSS V6 certified w/ XEN!!

http://hcl.xensource.com/ProductDeta...ge+Software+V6

http://www.citrix.com/ready/partners/open-e